Service Manual

ENGINE
4-9TimeCutter® Z/Precision® Z Service Manual
4
16. Torque the electric PTO clutch bolt to 50 – 60 ft-lbs.
(67.8 – 81.3 Nm), while holding the center hub of the
clutch (Fig. 253).
18. Release the mower arm tension and install the mow-
er drive belt onto the electric PTO clutch (Fig. 255).
15. Install the electric PTO clutch onto the crankshaft.
Make sure the slot of the PTO clutch engages with
the clutch stop bracket (Fig. 252).
17. Install the plug connector into the electric PTO clutch
(Fig. 254).
Fig. 252 PICT-9548
Fig. 253 PICT-9550
Fig. 254 PICT-9500a
Fig. 255 PICT-9493
19. Connect the negative battery cable to the battery.