Service Manual

CHASSIS
3-52 TimeCutter® Z/Precision® Z Service Manual
3
3. Install the lift link of the arm-lift to the lift lever as-
sembly with washer and cotter pin (Fig. 206).
4. Install the fuel tank to the frame (Fig. 207).
Fig. 206 PICT-9392
Fig. 207 PICT-9265a
2. Install the end of the arm-lift into the pivot block
(Fig. 204) and install the other pivot block to the
other side of the frame (Fig. 205). Tighten both pivot
blocks to the frame.
Fig. 204 PICT-9467
Fig. 205 PICT-9480