Service Manual

CHASSIS

3-23TimeCutter® Z/Precision® Z Service Manual

29. Remove the seat pivot/control assembly from the

frame (Fig. 091).

Note: The right handle assembly is being removed.

The left hand side is removed the same way.

Fig. 091 PICT-9301

30. Remove the two bolts and washers retaining the

handle assembly to the actuator arm (Fig. 092).

Fig. 092 PICT-9310a

27. On the left side remove the 2 bolts and nuts retain-

ing the seat pivot/control assembly to the frame (Fig.

089).

Fig. 089 PICT-9299

28. On the right side remove the remaining bolt and

nut retaining the seat pivot/control assembly to the

frame (Fig. 090).

Fig. 090 PICT-9364