Service Manual
MOWER DECK
6-21TimeCutter® Z/Precision® Z Service Manual
6
Checking the Tire Pressure
Tire Pressures
Model Rear Tire Front Tire
(caster wheels)
74360
13 psi (90 kPa)
74363 35 psi (241 kPa)
74370 20 psi (138 kPa)
Service Interval: Every 25 hours – Check tire pressure.
Maintain the air pressure in the front and rear tires as
VSHFL¿HG8QHYHQWLUHSUHVVXUHFDQFDXVHXQHYHQFXW
Check the pressure at the valve stem (Fig. 430). Check
the tires when they are cold to get the most accurate
pressure reading.
Fig. 430 ¿J*
A. Blade, in position for measuring
B. Level surface
C. Measured distance between blade and surface (a)
A. Valve stem
0HDVXUHIURPWKHWLSRIWKHEODGHWRWKHÀDWVXUIDFH
here. The variance should be no more than 1/8”
(3mm) (Fig. 429).
Fig. 429 ¿J*
A blade that is bent or damaged could break apart and
could seriously injure or kill you or bystanders.
$OZD\VUHSODFHEHQWRUGDPDJHGEODGHZLWKDQHZ
blade.
1HYHU¿OHRUFUHDWHVKDUSQRWFKHVLQWKHHGJHVRU
surfaces of blade.
a. If the difference between A and B is greater than 1/8”
(3mm) replace the blade with a new blade. Refer to
Removing the Blades and Installing the Blades.
Note: If a bent blade is replaced with a new one and
the dimension obtained continues to exceed
´PPWKHEODGHVSLQGOHFRXOGEHEHQW
Contact an Authorized Toro Dealer for service.
b. If the variance is within constraints, move to the next
blade.
Repeat this procedure on each blade.
!
A
C
B
A