Service Manual
CHASSIS
3-49TimeCutter® Z/Precision® Z Service Manual
3
2. Remove the mower deck; see “Mower Deck
Removal” on page 6-12.
3. Remove the four screws on the control panel and
move the control panel away from the pod (Fig.
192).
4. Remove the fuel cap and the rubber washer from the
IXHO¿OOWXEH
5. Remove the 3 shoulder screws retaining the right
hand pod to the frame (Fig. 193).
Fig. 192 PICT-9225
Fig. 193 IMG-0455a
6. Remove the wire plug on the wire harness from the
seat switch (Fig. 195).
6. Remove the right hand pod from the frame (Fig.
194).
Fig. 194 PICT-9232
Fig. 195 PICT-9246