Service Manual

CHASSIS
3-20 TimeCutter® Z/Precision® Z Service Manual
3
14. Remove the right and left control covers (Fig. 077). 16. Remove the z-bend of the parking brake cable from
the RH and LH gear control (Fig. 079).
Fig. 077 PICT-9275
15. Remove the screw securing the parking brake cable
to the RH and LH activator arm assembly (Fig. 078).
Fig. 078 PICT-9278
Fig. 079 PICT-9282
17. Pull the RH and LH brake cables out of the seat
pivot/control assembly area.
18. Push in the clip that retains the neutral switch to
the seat pivot/control assembly located below the
neutral slot for the forward/reverse levers (Fig. 080).
Fig. 080 PICT-9345