Service Manual

MOWER DECK
6-13TimeCutter® Z/Precision® Z Service Manual
6
Mower Deck Installation
6. Slide the mower deck rearward to remove the
mower belt from the engine pulley.
7. Slide the mower deck out from underneath the
machine.
5. Lift the mower deck and hanger brackets clear of
the rear lift rod and lower the mower carefully to the
ground (Fig. 413).
A. Mower deck C. Rear lift rod
B. Hanger bracket
A. Mower deck C. Rear lift rod
B. Hanger braket
1. Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers outward to the park
position, stop the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position.
3. Slide the mower under the machine.
4. Lower the height-of-cut lever to the lowest position.
5. Lift the rear of the mower deck and guide the hanger
brackets over the rear lift rod (Fig. 414).
Fig. 413 ¿J*
Fig. 414 ¿J*
A
B
C
B
A
B
C
B