Service Manual
CHASSIS
3-21TimeCutter® Z/Precision® Z Service Manual
3
5HPRYHWKHKDLUSLQDQGFOHYLVSLQRQWKHDGMXVWDEOH
yokes for both the right hand and left hand hydro
links (Fig. 083).
19. Remove the RH and LH neutral switch and pull the
wire assembly out of the control linkage area (Fig.
081).
Fig. 081 PICT-9342a
20. Remove the shoulder screw and washer that hold
the motion control damper to the RH and LH activa-
tor assembly (Fig. 082).
Fig. 082 PICT-9341
Fig. 083 PICT-9286
22. Put a 2 x 4 piece of wood under both sides of the
mower deck and lower the mower to the lowest
height of cut (Fig. 084).
Fig. 084 PICT-9291