Service Manual

ENGINE
4-4 TimeCutter® Z/Precision® Z Service Manual
4
14. Remove the engine wire harness plug (Fig. 232).
15. Remove the positive starter cable from the bottom of
the starter (Fig. 233).
17. Raise the engine off the frame (Fig. 235).
16. Remove the negative battery cable and the negative
wire from the wiring harness from the top of the
starter (Fig. 234).
Fig. 232 PICT-9522a
Fig. 233 PICT-9523
Fig. 234 PICT-9525
Fig. 235 PICT-9529