Service Manual
ENGINE
4-2 TimeCutter® Z/Precision® Z Service Manual
4
6. Release the spring tension on the idler arm using a
spring tool (Toro p/n 92-5771). Remove the drive belt
from the engine pulley (Fig. 224).
7. Remove the engine drive pulley from the crankshaft
of the engine (Fig. 225).
5HPRYHWKHKHDWVKLHOGIURPWKHPXIÀHU)LJ
8. Remove the two screws retaining the heat shield to
WKHPXIÀHU)LJ
Fig. 224 PICT-9506
Fig. 225 PICT-9509
Fig. 226 PICT-9510a
Fig. 227 PICT-9511a