Service Manual

CHASSIS
3-53TimeCutter® Z/Precision® Z Service Manual
3
6. Install the wire harness retainer to the seat base
(Fig. 209).
5. Install a cable tie through the retention tabs located
on the seat/pods bracket (Fig. 208).
Fig. 208 PICT-9238
Fig. 209 PICT-9251
8. Install the right hand pod to the frame (Fig. 211).
7. Install the wire plug on the wire harness to the seat
switch (Fig. 210).
Fig. 210 PICT-9246
Fig. 211 PICT-9240