Service Manual

A2-6 TimeCutter Z / Precision Z Service Manual
Transaxle Specifi cations
Lubrication SAE 20W-50 API Classifi cation SH/CD
Oil Capacity 1.6 to 1.7 qt. (1.5 to 1.6 liters)
Oil Level The transaxle is a sealed system and does not require periodic checking. Check oil at the oil
fi ll plug location only. Do not check the oil at the vent tube. Checking oil at the vent tube will
only give you a false reading or no reading at all, since this is the oil expansion area. If the oil
needs to be checked, the transaxle must be removed to check oil level and IT CAN BE ONLY
CHECKED COLD. There is a fi ll plug located at the top of the transaxle. To check the level of
the oil, remove the fi ll plug. Oil level should be 3/4” (1.9cm) from the top of the oil fi ll plug.
Fluid Change The transaxle is factory fi lled and does not require regular oil changes.
SPECIFICATIONS
MVC-204X
Hydrostatic Transaxles
Identifi cation:
Hydro-Gear EZT Hydrostatic Transaxles
2