Addendum

W 2004 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Contact us at www.Toro.com
All Rights Reserved
Printed in the USA
Original Instructions (EN)
Setup Addendum/Addendum d’organisation
TimeCutter
)
Z
Form No. 3352-131
Setup Addendum/Addendum d’organisation
m–7720
Figure 1
m–7721
Figure 2
English
Route the battery cable from the positive battery post to the solenoid. Ensure the cable is routed above the crossbar and
between the seat supports as shown in Figure 1.
Important Connect the cable to the positive post so that it extends parrallel with the top of the battery, as shown in
Figure 2, and verify that it does not come in contact with the seat pan.
Francais
Acheminez le câble de batterie de la borne positive au solénoïde. Assurez–vous que le câble passe au–dessus de la traverse et
entre les supports du siège, comme illustré à la Figure 1.
Important Connectez le câble à la borne positive de manière qu’il soit parallèle au haut de la batterie, comme illustré à la
Figure 2. Assurez–vous qu’il ne touche pas le plateau du siège.