Service Manual

CHASSIS

3 - 2 TimeCutter



Z Service Manual

Model and Serial Number Location

The unit model and serial number plate is located on

the frame under the seat as shown in the illustration

(Figure 3).

Figure 3

mvc-049

Engine Model and Serial Number

Identification

Consult the appropriate engine manufacturer’s service

literature for the location and translation of the engine

model and serial number information (Figure 4).

Transaxle Model and Serial Number

Figure 4

Greasing and Lubrication

The unit should be greased every 25 hours or more

often when operated in dusty, dirty or sandy conditions.

Grease Type: No. 2 general purpose lithium base

grease.

There are four grease fittings located in the front wheel

area:

1. One grease fitting is located in each of the cast

iron pivot castor supports (Figure 5).

Figure 5

mvc-050

2. One grease fitting is located on each front wheel

hub on the front tire (Figure 6).

Figure 6

mvc-051