Service Manual

14 HGM-H
BRAKE ARM ASSEMBLY
59
83
58
84
60
82
81
57
Figure 5, Brake Arm Assembly
Refer to Figure 5
Disassembly
1. Remove all items previously discussed in
their recommended order.
2. Mark the orientation of the brake arm (59)
before removal.
3. Remove the retaining ring (60).
4. Remove the brake handle (59), spring (82)
and spring pin (83).
5. Remove the spring spacer (81) and brake
spacer (57).
5. Remove the dowel pin (84) and the seal
(58). Discard the seal.
NOTE: Only remove the seal (58) and dowel
pin (84) if damaged or worn, or if doing
a complete disassembly.
Inspection
1. Inspect all parts for wear or damage. Re-
place as necessary.
Assembly
1. Reassemble all parts in the reverse order
of disassembly.
2. Install new seal (58) from seal kit.