Operator's Manual
MaintenanceService
Interval
MaintenanceProcedure
Every250hours
•Replacetheprimaryairlter(moreoftenindirtyordustyconditions).
•Checkthesafetyairlter(moreoftenindirtyordustyconditions).
•ChangethehydrauliclterandreservoirhydraulicuidwhenusingMobil®1uid
(moreoftenindirtyordustyconditions).
Every400hours
•Greasethecasterpivots(moreoftenindirtyordustyconditions).
Every500hours
•Replacethesafetyairlter(moreoftenindirtyordustyconditions).
•Replacethesparkplug(s).
•Checkthewheellug-nuttorque.
•Checkthewheel-hubnuttorque.
•Adjustthecaster-pivotbearings.
•Checktheparking-brakeadjustment.
•ChangethehydrauliclterandreservoirhydraulicuidwhenusingToro®
HYPR-OIL™500hydraulicuid(moreoftenindirtyordustyconditions).
Every2,000hours
•Changetheoilinall3gearboxhousingsandaddoilasneeded.
Monthly
•Checkthebattery.
Yearly
•GreasethePTO-beltidlerarm(moreoftenindirtyordustyconditions).
•Greasethepump-beltidlerarm(moreoftenindirtyordustyconditions).
•Repackthecaster-wheelbearings(moreoftenindirtyordustyconditions).
•Greasetherearcasterwheelhubs(moreoftenindirtyordustyconditions).
Yearlyorbeforestorage
•Paintchippedsurfaces.
•Checkallmaintenanceprocedureslistedabovebeforestorage.
Important:Refertoyourengineowner'smanualforadditionalmaintenanceprocedures.
CAUTION
Ifyouleavethekeyintheswitch,someonecouldaccidentlystarttheengineandseriously
injureyouorotherbystanders.
Shutofftheengineandremovethekeyfromtheswitchbeforeyouperformanymaintenance.
Lubrication
GreasingtheMachine
ServiceInterval:Every40hours—Greasethedrive
shaft(moreoftenindirtyordusty
conditions).
Every100hours—Greasethemower-deck
ip-uppivot(moreoftenindirtyordusty
conditions).
Every100hours—Greasethemower-deck
push-armtubes(moreoftenindirtyordusty
conditions).
Yearly—GreasethePTO-beltidlerarm(more
oftenindirtyordustyconditions).
Greasethemachinemoreoftenindirtyordusty
conditions.
GreaseType:No.2lithiumormolybdenumgrease
1.Parkthemachineonalevelsurface,disengage
thePTO,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Cleanthegreasettingswitharag.
Note:Scrapeanypaintoffthefrontofthe
tting(s).
4.Connectagreaseguntothetting.
5.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings.
6.Wipeupanyexcessgrease.
33