Service Manual

Toro®- Z Master® 8000 Series Service Manual9-2
9
September 2016
Table of Contents
ELECTRICAL
Fuses
Location
The three chassis fuses are located under the
operator’s seat, on the right side of the unit (Figure
166).
How it Works
The fuses protect the electrical system from electrical
surges.
Testing
Use a multi-meter, set to Ohm or Continuity setting,
check the continuity between the fuse blades. If the
fuse is OPEN, replace it and test the circuit.
The fuses used in this application can also be visually
inspected. A failed fuse can be identified by the
broken/melted element inside the fuse cover or a
damaged spade (Figure 167).
Figure 166
Figure 167