Operator's Manual

g020525
Figure54
1.22.7to23.3cm(8.92to
9.16inches)
2.Nuts
9.Engageanddisengagethebrakestocheckfor
properengagementanddisengagement.Adjust
ifnecessary.
Note:Whenthebrakesaredisengaged,there
shouldbelittletonofreeplayinthebrake
linkagewithnodragginginthebrakes.
BeltMaintenance
InspectingtheBelts
ServiceInterval:Every40hours
1.Parkthemachineonalevelsurface,movethe
speed-controllevertotheNEUTRALposition,
disengagethePTO,andengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.TiltthehopperupandcheckthepumpandPTO
drivebeltsforwear,cracking,orcontamination.
Note:Thebeltsarespringtensionedandno
adjustmentisnecessaryunlessthebeltsare
replaced.
ReplacingthePTOBelts
1.Parkthemachineonalevelsurface,movethe
speed-controllevertotheNEUTRALposition,
disengagethePTO,andengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Withtheengineoff,engagethePTOlever,then
removethehairpincotterandclevispinatthe
bottomofthePTO-brakeband.
4.Rotatethebrakebandupwardandoutofthe
wayofthebeltskeepingclearofthebeltdrive.
5.DisengagethePTOlever.
6.LoosenbeltguidesAandB(Figure55).
7.Removethebelts.
8.Routethenewbeltsontothepulleysasshown
inFigure55.
47