Operator's Manual

Figure60
1.Loosendoorhinge
nuts-threeperside
2.Placeapieceof9.5mm
(3/8inch)rubberonthis
surface
MowerDeckLockingPinStop
Adjustment
1.Slidethemowerdecklockingpinsinonbothsidesand
rotatetolockthemowerdeckintheoperationposition.
2.Loosenthejamnutandturnthestopscrewclockwise
untilthelockingpinsistightandcannotberotatedby
hand(Figure61).
Figure61
1.Rotatestopscrewclockwiseuntillockingpinistight,then
backoff1/2turn.
2.Loosenjamnut
3.Loosenthestopscrewcounterclockwise1/2turnand
tightenthejamnut
4.Testthelockingpintomakesureitslidesfreely.
Readjustifnecessary.
HydraulicSystem
Maintenance
ServicingtheHydraulic
System
HydraulicOilType:Toro
®
HYPR-OIL
™
500hydraulicoil
orMobil
®
115W-50.
Important:Useoilspecied.Otheruidscouldcause
systemdamage.
CheckingtheHydraulicOil
ServiceInterval:Every40hours—Checkthehydraulicoil
level.
1.Positionthemachineonalevelsurface.
2.Movethespeedcontrollevertotheneutralposition
tostopthemachine.
3.DisengagethePTO,engagetheparkingbrake,stopthe
engine,andwaitforallmovingpartstostop.
4.Allowtheengineandthehydraulicsystemtocoolfor
10minutes.
Note:Togetthecorrectreading,checkthehydraulic
oillevelwhenthemachineisnothot.
5.Raisetheseatup.
6.Cleantheareaaroundthedipstickofthe
hydraulic-systemreservoir(Figure62).
7.Removethedipstickfromthehydraulicreservoir
(Figure62).
8.Wipethedipstickoffandthreadthedipstickintothe
reservoir.
9.Removethedipstickandlookattheend(Figure62).
Iftheoillevelisattheaddmark,slowlypouronly
enoughoilintothehydraulicreservoirtoraisethelevel
tothefullline.
Important:Donotoverllthehydraulicunits
withoilasdamagemayoccur.Donotrunthe
machinewiththeoilbelowtheaddmark.
10.Installthedipstick.
47