Service Manual

5-11Z Master 500 Gas Series Service Manual

ENGINE

Note: The front left engine mounting bolt has two

ground cables (Fig. 192). Tighten the bolts.

Fig 192 DSC-2983

3. Install the mower drive belt around the electric PTO

clutch, refer to Replacing the Mower Belt page 7-24.

4. Plug the electric PTO clutch harness into the clutch

(Fig. 193). Secure the clutch wire to the PTO stop

rod with a tie strap.

Fig 193 DSC-2977

Fig 195 DSC-2978

6. Install the red heavy gauge wire from the solenoid to

the engine starter (Fig. 195).

Fig 194 DSC-2980

5. Connect the three wires going from the main

harness to the engine (Fig. 194).

• Violet wire to the Regulator/Rectier

• White wire to the Engine Magneto wire

• Pink wire to the Fuel Solenoid

A. Violet Wire C. Pink Wire

B. White Wire