Service Manual

CHASSIS

3-61Z580/Z593/Z595 Diesel Service Manual

Motion Control Damper Replacment

Motion Control Damper Removal

5. Remove the outer nut from the bolt on the upper end

of the damper (Fig. 230).

Fig 230 PICT-3173

6. Remove the damper assembly (Fig. 231).

1. Park the machine on a level surface, disengage the

PTO, turn the ignition off and remove the key.

2. Raise the seat.

3. Remove the negative battery cable from the battery.

4. Remove the outer nut from the bolt on the lower end

of the damper (Fig. 229).

Fig 231 PICT-3178

Fig 229 PICT-3171

There is a right and a left motion control damper. The

following removal and installation procedures are done

on the right damper. The procedures are the same for

the left damper.