Service Manual

CHASSIS

3-7Z580/Z593/Z595 Diesel Service Manual

Wheel Assembly (Fig. 024).

7. Install a new tapered bearing cup into the wheel

assembly by pressing each bearing cup into the

wheel hub so that the thicker part of the taper is

pressed into the wheel hub ﬁ rst. The bearing cups

should seat against the shoulder divots inside the

wheel hub (Fig. 025).

9. Install the tapered bearings into each side of the

wheel hub (Fig. 027).

Fig 024 IMG_7880a

Fig 025 IMG_7881a

Fig 027 IMG_7882a

8. Pack both tapered bearings with grease (No. 2 gen-

eral purpose lithium base or molybdenum grease)

(Fig. 026).

A. Bearing spacer (2) E. Wheel and tire

B. Grease seal (2) assembly

C. Tapered bearing (2) F. Caster spacer

D. Tapered bearing G. Wheel assembly axle

cup (2) bolt

H. Nut

Fig 026 IMG_7718a

AABBCCDD