Service Manual
5-9Z Master 500 Gas Series Service Manual
5
ENGINE
Fig 186 DSC-2978
6. Remove the tie strap securing the electric PTO
clutch wire to the PTO stop bracket.
7. Remove the mower drive belt from the electric PTO
clutch; refer to Replacing the Mower Belt page 7-24.
8. Remove the red heavy gauge wire from the solenoid
to the engine starter (Fig. 186).
9. Disconnect three wires going from the main harness
to the engine (Fig. 187).
• Violet wire to the Regulator/Rectier
• White wire to the Engine Magneto wire
• Pink wire to the Fuel Solenoid
Fig 187 DSC-2980
10. Turn the fuel shut-off OFF. Remove the fuel line
clamp at the engine and remove the fuel line (Fig.
188).
Fig 188 DSC-2981
Fig 185 DSC-2977
5. Disconnect the electric PTO clutch wire from the
clutch (Fig. 185).
A. Violet Wire C. Pink Wire
B. White Wire
A Fuel Valve B Fuel Line Clamp
A
B
C
A
B