Service Manual
3-12 Z Master 500 Gas Series Service Manual
3
5. On the left side, remove the two bolts and nuts
holding the ange bearing (Fig. 059).
CHASSIS
4. On the right side, remove the two bolts and nuts
holding the ange bearing (Fig. 058).
Fig 059 DSC-3105
Fig 058 DSC-3104
7. Inspect the brake shaft and ange bearings for
excessive wear (Fig. 061).
Fig 061 DSC-3107
6. Remove the brake shaft from the left side of the unit
(Fig. 060).
Fig 060 DSC-3106
A. Brake shaft C. Bolts
B. Flange bearings D. Nuts
B
B
A
C C
D
D