Service Manual

9
BDP-10A/16A/21L
This symbol points out important safety
instructions which, if not followed, could endan-
ger the personal safety and/or property of your-
self and others. Read and follow all instructions
in this manual before attempting maintenance
on your BDP’s. When you see this symbol -
HEED ITS WARNING.
WARNING
POTENTIAL FOR SERIOUS INJURY
Inattention to proper safety, operation, or
maintenance procedures could result in
personal injury, or damage to the equip-
ment. Before servicing or repairing the
BDP-10A, 16A or 21L, fully read and un-
derstand the safety precautions de-
scribed in this section.
PERSONAL SAFETY
Certain safety precautions must be observed
while servicing or repairing the BDP-10A, 16A
or 21L. This section addresses some of these
precautions but must not be considered an all-
inclusive source on safety information. This sec-
tion is to be used in conjunction with all other
safety material which may apply, such as:
Other manuals pertaining to this machine
Local and shop safety rules and codes
Governmental safety laws and regulations
Be sure that you know and understand the equip-
ment and the hazards associated with it. Do not
place speed above safety.
Notify your supervisor whenever you feel there is
any hazard involving the equipment or the per-
formance of your job.
Never allow untrained or unauthorized person-
nel to service or repair the equipment.
TOOL SAFETY
Use the proper tools and equipment for the task.
Inspect each tool before use and replace any tool
that may be damaged or defective.
WORK AREA SAFETY
Keep the work area neat and orderly. Be sure it
is well lit, that extra tools are put away, trash and
refuse are in the proper containers, and dirt or
debris have been removed from the working ar-
eas of the machine.
The floor should be clean and dry, and all exten-
sion cords or similar trip hazards should be re-
moved.
SERVICING SAFETY
Certain procedures may require the vehicle to
be disabled in order to prevent possible injury
to the servicing technician and/or bystanders.
The loss of hydrostatic drive line power may re-
sult in the loss of hydrostatic braking capability.
Some cleaning solvents are flammable. Use only
approved cleaning materials: Do not use explo-
sive or flammable liquids to clean the equipment.
To avoid possible fire, do not use cleaning sol-
vents in an area where a source of ignition may
be present.
Discard used cleaning material in the appropri-
ate containers.
Wear appropriate clothing. Loose or hanging
clothing or jewelry can be hazardous. Use the
appropriate safety equipment, such as eye and
hearing protection, and safety-toe and slip-proof
shoes.
Never use compressed air to clean debris from
yourself or your clothing.
SECTION 2. SAFETY