Service Manual

6-4 Z Master 597 Diesel Series Service Manual
6
ELECTRICAL
5. Disconnect voltage and multimeter leads from relay
terminals (Fig. 345).
Fig 345 xl relay
The PTO (Power Take Off) switch is typically used to
activate the Electric PTO Clutch and to function as part
of the safety interlock system.
Contacts inside the switch electrically connect various
terminals in both “On” and “Off” position. When the
PTO is pulled out to the ON position, current ows to
the electric clutch and it engages. When the switch is
pushed in to OFF position, current ows through the
PTO switch to the Park Brake switch as part of the circuit
used to ensure safe starting.
Fig 346 DSC-2519
The PTO switch is located on the control panel, on the
left side of the operator (Fig. 346).
Location
Purpose
PTO SWITCH
How It Works
Testing
1. Disengage the PTO, set the parking brake, and turn
the ignition to OFF and remove the key.
2. Remove the 4 screws holding the control panel to
the fuel tank.
3. Disconnect the wiring harness from the PTO switch.
4. Press in the locking tabs, on each side of the switch,
and pull the switch out of the control panel.