Service Manual

5-26 Z Master Z597 Diesel Service Manual

ENGINE

5. Install and tighten the tank return hydraulic hose

assembly to the radiator. This is located at the left

rear corner of the radiator (Fig. 314).

Fig 314 DSC-2652

6. Install the radiator overow hose and tie strap the

hose next to the radiator cap (Fig. 315).

Fig 315 DSC-2434

Fig 313 DSC-2656

3. Before tightening the bolts and washers, check

to make sure there is clearance between the fan

blades and the engine cooling shroud and then

tighten all 6 bolts.

4. Install the two hydraulic case drain lines to the

T-tting, located under the front left corner of the

radiator (Fig. 313).

7. Install the engine outlet hose, located on the right

side of the fan mounting plate assembly. Through

the access hole tighten the hose clamp (Fig. 316).

Fig 316 DSC-2428