Operator's Manual

33
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 8 hours
• Hydraulic fluid—check level
• Hydraulic filter—change
After first 50 hours
• Engine Oil—change
• Oil Filter—change
After first 250 hours
• Primary hydraulic filter—change
• Cooling Fan hydraulic filter—change
Each Use
• Oil—check level
• Safety system—check
• Mower housing—clean
• Engine air intake—clean
1
• Engine coolant—check
Every 8 Hours • Cutting Blades—check
Every 25 Hours
• Cooling fan belt idler arm—grease
• Mower belt idler arm—grease
• Pump drive belt idler arm—grease
• Traction belt idler arm—grease
• Brake lever—grease
• Mower support arms—grease
• Linkage bushings—oil
1
• Hydraulic fluid—check level
• Battery—check electrolyte
• Blade Spindle Bearings—grease
Every 50 Hours • Tires—check pressure
Every 100 Hours
• Belts—check for wear/cracks
• Hydraulic lines—check
• Engine Cooling System—clean
1
• Hydraulic lines—check
• Cooling system hoses—check
Every 150 Hours • Engine Oil—change
1
Every 200 Hours
• Brake pivot—grease
• Engine Cooling System—check
Every 250 Hours • Primary Air filter—clean
1
Every 300 Hours • Oil Filter—change
Every 500 Hours or at
Storage
• Caster Pivot— adjust
• Wheel Hub Slotted Nut— adjust
Every 600 Hours • Safety Air filter—replace
1
Every 800 Hours • Fuel filter—replace