Service Manual

3-21Z Master Z597 Diesel Service Manual

CHASSIS

2. Install the ange bearing over the left side of the

brake shaft, ange facing outward. Install mounting

bolts from the outside of the ange, through brake

retainer spacers, and through the frame.

Note: Before tightening the mounting hardware,

be sure that the brake lever arm is pointing

upward between the mounting hardware (Fig.

080).

Fig 080 DSC-1641

Fig 082 DSC-1644

4. Install clevis spring pin connecting brake rod to

brake shaft. Rotate clevis spring pin until it clips onto

brake rod clevis (Fig. 082).

Fig 081 DSC-1643

5. Install left and right rear tires. Torque wheel

mounting bolts to 95 ft-lbs (128.8 Nm).

3. Install clevis pin connecting the lower brake

assembly to brake shaft. Install cotter pin into clevis

pin (Fig. 081). Repeat procedure for right side.

A. Brake Lever Arm C. Bolt

B. Spacer