Service Manual

4-23Z Master Z597 Diesel Service Manual

HYDRAULIC SYSTEM

Fig 198 DSC-2370

12. Install the rear heat shield and tighten the bolts (Fig.

198).

13. Close the engine hood and latch. Start unit up and

operate for approximately 5 minutes and check the

oil level in the reservoir.

Note: Adjust handle neutral before setting pump

neutral. See Adjusting the Handle Neutral,

page 4-24.

This adjustment must be made with drive wheels turning.

Fig 199 DSC-2352

Fig 200 DSC-2357

2. Slide the seat fully forward, unlatch the seat and tilt

the seat forward (Fig. 200).

Setting the Hydrostatic Pump Neutral

1. Raise the frame and support the machine so drive

wheels can rotate freely (Fig. 199).