Service Manual

4-11Z Master Z597 Diesel Service Manual
4
HYDRAULIC SYSTEM
Fig 154 DSC-2119
2. Align the brake linkage up with the two front bolt
holes (Fig. 154).
Fig 153 DSC-2116
1. Install wheel motor in the frame. Loosely install the
back two bolts, long spacers, lock washers and nuts
(Fig. 153).
3. Install the two front bolts, short spacers, lock
washers, and nuts through the wheel motor, brake
linkage and frame (Fig. 155).
Fig 155 DSC-2120
4. Install the two rear bolts and long spacers through
the wheel motor and frame.
5. Torque the bolts to 80 to 90 ft-lbs. (108 to 122 Nm)
(Fig. 156).
Fig 156 DSC-2122