Service Manual

4-9Z Master Z597 Diesel Service Manual

HYDRAULIC SYSTEM

6. Remove the brake band from the hub (Fig. 146).

Fig 146 DSC-2107

Fig 148 DSC-2110

8. Clean any dirt or debris away from the hydraulic line

ttings. Remove the hydraulic lines.

Note: Cap the ttings and hoses to prevent dirt from

entering the hydraulic system (Fig. 148).

Fig 147 DSC-2108

7. Install a wheel puller on to the hub and remove the

hub from the motor output shaft (Fig. 147).

9. Remove the front two wheel motor mounting bolts,

lock washers, and nuts (Fig. 149).

Fig 149 DSC-2111

Note: The Hub Removal Tool (TOR 4097) can also

be used and is available through your Toro

Distributor.