Service Manual

7-10 Z Master 597 Diesel Series Service Manual
7
7. On the right side of the unit is the spring loaded
idler pulley for the inner mower drive belt. Insert a
3/8” ratchet drive with a 6” extension into the square
hole in the idler bracket. Pull back on the ratchet to
relieve tension on the belt. Slip the belt off the idler
pulley and the PTO clutch pulley (Fig. 419).
Fig 419 DSC-2607
8. Lift the oor pan (Fig. 420).
Fig 420 DSC-2625
Fig 422 DSC-2628
10. Remove the tension spring on the idler arm (Fig.
422).
Fig 421 DSC-2626
9. Remove the right side belt cover (Fig. 421).
MOWER DECKS