Operator's Manual

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 8 operating
hours
• Check cooling system level.
• Check the hydraulic uid.
After the rst 25
operating hours
• Change the hydraulic lter and oil.
After the rst 50
operating hours
• Change the engine oil.
• Change the engine oil lter.
Before each use or daily
• Check the safety system.
• Check the engine oil.
• Check cooling system level.
• Clean the cooling system.
• Check the mower blades.
• Clean the mower deck.
Every 25 hours
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic uid.
Every 50 hours
• Check the tire pressure.
• Check the pump drive belt.
• Check the alternator belt.
Every 100 hours
• Change the engine oil.
• Check the cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the hydraulic hoses.
Every 150 hours
• Lubricate the machine with light oil (Refer to Lubrication).
Every 200 hours
• Replace the primary air lter.
• Change the engine oil lter.
• Grease the brake pivot.
Every 500 hours
• Check the wheel hub slotted nut.
• Adjust the caster pivot bearing.
• Replace the fan hydraulic lter.
Every 600 hours
• Replace the safety air lter.
Every 800 hours
• Replace the fuel lter.
Yearly
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Change the hydraulic lter and oil.
Every 2 years
• Change the engine coolant.
Important: R efer to y our Engine Operator’ s Man ual f or additional maintenance pr ocedur es.
32