Operator's Manual

5. Slide the red ter minal boot off the positi v e
(red) batter y ter minal. T hen remo v e the
positi v e (red) batter y cable ( Figure 46 ).
Figure 46
1. Negative Battery Post
3. Red (+) cable
2. Positive Battery Post
4. Black (-) cable
6. R emo v e both wing n uts (1/4 inc h) securing
the batter y clamp ( Figure 47 ).
7. R emo v e the tw o bolts holding the h y draulic
tank in place ( Figure 47 ).
8. Slide the h y draulic tank a w a y from the batter y .
9. R emo v e the batter y .
Figure 47
1. Battery
4. Wing nut
2. Hydraulic tank 5. Right side fuel tank
3. Bolts
Installing the Battery
1. P osition batter y in the tra y with the ter minal
posts opposite from the h y draulic tank
( Figure 46 ).
2. First, install the positi v e (red) batter y cable to
positi v e (+) batter y ter minal.
3. T hen install the neg ati v e batter y cable and
g round wire to the neg ati v e (-) batter y ter minal.
4. Secure the cables with 2 bolts (1/4 x 3/4 inc h),
2 w ashers (1/4 inc h), and 2 loc kn uts (1/4 inc h)
( Figure 46 ).
5. Slide the red ter minal boot onto the positi v e
(red) batter y post.
6. Secure batter y with J-bolts , hold do wn clamp
and 2 w ashers (1/4 inc h), and 2 wing n uts
(1/4 inc h) ( Figure 47 ).
40