Service Manual
CHASSIS
3-7Z580/Z593/Z595 Diesel Service Manual
3
Wheel Assembly (Fig. 024).
7. Install a new tapered bearing cup into the wheel
assembly by pressing each bearing cup into the
wheel hub so that the thicker part of the taper is
pressed into the wheel hub fi rst. The bearing cups
should seat against the shoulder divots inside the
wheel hub (Fig. 025).
9. Install the tapered bearings into each side of the
wheel hub (Fig. 027).
Fig 024 IMG_7880a
Fig 025 IMG_7881a
Fig 027 IMG_7882a
8. Pack both tapered bearings with grease (No. 2 gen-
eral purpose lithium base or molybdenum grease)
(Fig. 026).
A. Bearing spacer (2) E. Wheel and tire
B. Grease seal (2) assembly
C. Tapered bearing (2) F. Caster spacer
D. Tapered bearing G. Wheel assembly axle
cup (2) bolt
H. Nut
Fig 026 IMG_7718a
AABBCCDD
E
F
G
H