Service Manual

ENGINE

5-18 Z580/Z593/Z595 Diesel Service Manual

64. Remove the 5 stub shaft mounting bolts (Fig. 470).

A. Half of the engine isolation mount

B. Spacer

C. Half of the engine isolation mount

66. Remove the rear engine mount bracket from the

engine by removing the 4 bolts and lock washers

securing it to the engine (Fig. 472).

Fig 470 PICT-3640

Fig 472 PICT-3635

65. Remove the stub shaft from the ﬂ ywheel (Fig. 471).

Fig 471 PICT-3642

63. Inspect the 3 sets of engine isolation mounts and

spacers. Replace if damaged or worn (Fig. 469).

Note: The engine isolation mounts come in pairs.

If one half of the pair is damaged, the whole

mount should be replaced.

Fig 469 PICT-3631a