Operator's Manual

Figure52
1.Trackingknob4.Turnthiswaytotrackright
2.Hydraulictank
5.Turnthiswaytotrackleft
3.Hydraulicpumps
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthereartiresat13psi(90
kPa).Uneventirepressurecancauseunevencut.Check
thetireswhentheyarecoldtogetthemostaccurate
pressurereading.
Note:Thefronttiresaresemi-pneumatictiresanddo
notrequireairpressuremaintenance.
Figure53
CheckingtheWheelHub
SlottedNut
ServiceInterval:Aftertherst100hours—Checkthe
wheelhubslottednut.
Every500hours—Checkthewheel
hubslottednut.
Aftertherst100hours—Checkthe
wheellugnuts.
Every500hours—Checkthewheel
lugnuts.
Theslottednutneedstobetorquedto125ft-lb
(170N-m).
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Removethecotterpin.
4.Checkthedistancefrombottomofslotinnutto
insideedgeofhole.Twothreadsorlessshouldbe
showing(
Figure54).
Figure54
1.SlottedNut3.Holeinthreadedshaft
2.Twothreadsorless
showing
4.Washer(ifneeded)
5.Ifmorethantwothreadsareshowingremovenut
andinstallwasherbetweenhubandnut.
6.Torquetheslottednutto125ft-lb.(170N-m)
(
Figure54).
7.Tightenthenutuntilthenextsetofslotslineupwith
theholeintheshaft(Figure54).
8.Replacethecotterpin.
AdjustingtheCasterPivot
Bearing
ServiceInterval:Every500hours(oryearly,whichever
comesrst).
42