Operator's Manual

2. Clean around eac h fuel tank cap and remo v e

the cap . Add fuel to both fuel tanks , until the

lev el is 1/4 to 1/2 inc h (6 to 13 mm) belo w

the bottom of the ﬁller nec k. T his space in the

tank allo ws the fuel to expand. Do not ﬁll the

fuel tanks completely full.

3. Install fuel tank caps securely . Wipe up any

fuel that ma y ha v e spilled.

4. If possible , ﬁll the fuel tank after eac h use . T his

will minimize possible buildup of condensation

inside the fuel tank.

Checking the Engine Oil

Level

Before y ou star t the engine and use the mac hine ,

c hec k the oil lev el in the engine crankcase; refer

to Chec king Oil Lev el in Engine Maintenance ,

pag e 33

Switching the Fuel Tanks

Important: Do not r un the machine out

of fuel. T his may cause engine dama ge and

r equir e the fuel system to be check ed.

T he fuel selector v alv e is located behind the left

side of the seat.

T he unit has tw o fuel tanks . One tank is on the left

side and one on the right side . Eac h tank connects

to the fuel selector v alv e . F rom there a common

fuel line leads to the engine ( Figure 5 ).

T o use the left side fuel tank rotate the fuel selector

v alv e to the LH, lefthand location. T o use the right

side fuel tank rotate the fuel selector v alv e to the

RH, righthand location ( Figure 5 )

Close the fuel selector v alv e before transpor ting

or storing mac hine .

Figure 5

1. Left side fuel tank 2. Fuel selector valve

Using the Rollover

Protection System (ROPS)

T o a v oid injur y or death fr om r ollo v er : k eep

the r oll bar in the raised lock ed position and

use the seat belt.

Ensur e that the r ear par t of the seat is

secur ed with the seat latch.