Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Biodiesel Ready
- Filling the Fuel Tank
- Checking the Engine-Oil Level
- Switching the Fuel Tanks
- Using the Rollover Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Starting and Stopping the Engine
- Operating the Power Takeoff (PTO)
- Using the Safety-Interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height of Cut
- Adjusting the Anti-Scalp Rollers
- Adjusting the Flow Baffle
- Positioning the Flow Baffle
- Using the Lift-Assist Lever
- Positioning the Seat
- Changing the Seat Suspension
- Unlatching the Seat
- Pushing the Machine by Hand
- Using the Side Discharge
- Operating with the Overheat Sensor
- Transporting the Machine
- Loading the Machine
- Using the Z Stand™
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
CheckingtheWheelLugNuts
ServiceInterval:Aftertherst100hours
Every500hours
Checkandtorquethewheellugnutsto286to352N∙m(211
to260ft-lb).
Note:Donotuseanti-seizecompoundonthewheelhub.
AdjustingtheCaster-Pivot
Bearing
ServiceInterval:Every500hours
1.DisengagethePTO,movethemotion-controlleversto
theNEUTRAL-LOCKposition,andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Removethedustcapfromthecasterandtightenthe
locknut(Figure59).
4.Tightenthelocknutuntilthespringwashersareat,
thenbackoffa1/4turntoproperlysetthepre-loadon
thebearings(Figure59).
Important:Makesurethatthespringwashersare
installedcorrectlyasshowninFigure59.
5.Installthedustcap(Figure59).
Figure59
1.Springwashers
3.Dustcap
2.Locknut
ServicingtheGearbox
CheckingtheGearbox-OilLevel
ServiceInterval:Every100hours
UseSAE75W–90syntheticgearlube.
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,movethemotion-controlleversto
theNEUTRAL-LOCKposition,andsettheparkingbrake.
3.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
4.Removethesideorrearplugonthegearbox.(Figure
60).
5.Theoilshouldbeuptotheopeningofthegearbox.
6.Addoilifneededtobringittothecorrectlevel.
Figure60
1.Gearbox
3.Rearplug
2.Sideplug
4.Pulley
ChangingtheGearboxOil
ServiceInterval:Aftertherst100hours
Yearly
ContactanAuthorizedServiceDealertochangethegearbox
oil.
46