Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Biodiesel Ready
- Filling the Fuel Tank
- Checking the Engine-Oil Level
- Switching the Fuel Tanks
- Using the Rollover Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Starting and Stopping the Engine
- Operating the Power Takeoff (PTO)
- Using the Safety-Interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height of Cut
- Adjusting the Anti-Scalp Rollers
- Adjusting the Flow Baffle
- Positioning the Flow Baffle
- Using the Lift-Assist Lever
- Positioning the Seat
- Changing the Seat Suspension
- Unlatching the Seat
- Pushing the Machine by Hand
- Using the Side Discharge
- Operating with the Overheat Sensor
- Transporting the Machine
- Loading the Machine
- Using the Z Stand™
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
119–0398
121–7562
1.Pushtostart4.Variablespeedcontrol
2.ReadtheOperator’s
Manualformore
informationonpreheating
theengine.
5.Fast
3.Slow
126-2055
1.Wheellugnuttorque129N∙m(95ft-lb)(4x)
2.Wheelhubnuttorque319N∙m(235ft-lb)
3.ReadandunderstandtheOperator’smanualbefore
performinganymaintenance,checktorqueafterrst100
hoursthenevery500hoursthereafter.
127-0326
1.ReadtheOperator's
Manual.
3.Removethekeyfrom
theignitionandreadthe
Operator'sManualbefore
performingmaintenance
orservicingthemachine.
2.Heightofcut
131-4036
1.Maximumdrawbarpull36
kg(80lb).
2.ReadtheOperator's
Manual.
Manufacturer'sMark
1.Indicatesthebladeisidentiedasapartfromtheoriginal
machinemanufacturer.
12