Operator's Manual

8.Iftheaxleassemblyhashadbothspacernutsremoved
(orbrokenloose),applyathreadlockingadhesiveto1
spacernutandthreaditontotheaxlewiththewrench
atsfacingoutward.Donotthreadthespacernutallof
thewayontotheendoftheaxle.Leaveapproximately
3mm(1/8inch)fromtheoutersurfaceofthespacer
nuttotheendoftheaxleinsidethenut.
9.Inserttheassemblednutandaxleintothewheelonthe
sideofthewheelwiththenewsealandbearing.
10.Withtheopenendofthewheelfacingup,llthearea
insidethewheelaroundtheaxlefullofgeneral-purpose
grease.
11.Insertthesecondbearingandnewsealintothewheel.
12.Applyathreadlockingadhesivetothesecondspacer
nutandthreaditontotheaxlewiththewrenchats
facingoutward.
13.Torquethenutto8-9N-m(75-80in-lb),loosen,then
re-torqueto2-3N-m(20-25in-lb).Makesurethatthe
axledoesnotextendbeyondeithernut.
14.Installthesealguardsoverthewheelhubandinsert
thewheelintothecasterfork.Installthecasterbolt
andtightenthenutfully.
Important:Topreventsealandbearingdamage,check
thebearingadjustmentoften.Spinthecastertire.The
tireshouldnotspinfreely(morethan1or2revolutions)
orhaveanysideplay.Ifthewheelspinsfreely,adjustthe
torqueonthespacernutuntilthereisaslightamountof
drag.Applythreadlockingadhesive.
EngineMaintenance
ServicingtheAirCleaner
Note:Checktheltersmorefrequentlyifoperating
conditionsareextremelydustyorsandy.
RemovingtheAirFilter
ServiceInterval:Every250hours
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedpositionandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Releasethelatchesontheaircleanerandpulltheair
cleanercoveroffoftheaircleanerbody(
Figure40).
4.Cleantheinsideoftheaircleanercoverwith
compressedair.
5.Gentlyslidethelteroutoftheaircleanerbody
(
Figure40).Avoidknockingthelterintothesideof
thebody.
6.Inspectthelterfordamagebylookingintothelter
whileshiningabrightlightontheoutsideofthelter.
Holesinthelterwillappearasbrightspots.Ifthe
lterisdamageddiscardit.
Figure40
1.Airlterbody
3.Aircleanercover
2.Airlter
4.Latches
34