Operator's Manual

g007166
Figure82
1.Clutch4.Clutchcenterbolt
2.2boltsandnutsforclutch
strap
5.Electricalconnection
3.Rubberclutchstrap
9.Inserta0.381to0.533mm(0.015to0.021inch)
feelergaugethroughaninspectionslotinthe
sideoftheassembly(Figure83).
Note:Makesurethatitisbetweenthearmature
andtherotorfrictionsurfaces.
10.Tightenthelocknutsuntilthereisslightbinding
onthefeelergaugebutitcanbemovedeasily
withintheairgap(Figure83).
11.Repeatthisfortheremainingslots.
12.Checkeachslotagainandmakeslight
adjustmentsuntilthefeelergaugebetween
therotorandarmaturehasveryslightcontact
betweenthem.
g007168
Figure83
1.Slot
3.Feelergauge
2.Adjustingnut
13.Installtheclutchtotheengineshaftwiththekey.
14.Applythread-lockingadhesivetothecenterbolt.
15.Whileholdingthecrankshaftatthebackofthe
machine,installthecenterboltandtorqueitto
68N∙m(50ft-lb)(Figure82).
16.Installtherubberclutchstraptothemower
framewiththe2previouslyremovedboltsand
nuts(Figure82).
17.Pulluponthespring-loadedidlerforthe
PTO-drivebeltandinstallitontotheclutch
pulley(Figure81).
18.Plugintheelectricconnectionfortheclutch
(Figure82).
19.Installthefrontenginepanelandtightenthe
knobs.
20.Lowerdowntheseat.
58