Service Manual

MOWER DECKS

7-15Z580/Z593/Z595 Diesel Service Manual

13. Remove the large spacer in the spindle housing (Fig.

741).

Fig 741 CLR DSC-2682

14. This view shows the 2 bearing races and the large

spacer in the spindle housing (Fig. 742). Note the

internal snap ring in the housing; it is not necessary

to remove it when installing new bearing races and

the spacer.

Fig 742 CLR DSC-2684

11. Remove the tapered roller bearing from the bottom

of the spindle (Fig. 739).

A. Bearing Race B. Spacer

Fig 739 CLR DSC-2680

12. Using a hammer and a driver with a square edge,

drive both the top and bottom bearing races out of

the spindle housing (Fig. 740).

Fig 740 CLR DSC-2681