Service Manual

ENGINE
5-49Z580/Z593/Z595 Diesel Service Manual
5
Cooling Fan Removal
12. Ensure the drain plug is installed and tight.
13. Fill the radiator with a 50/50 mix of extended life
antifreeze/Dex-Cool and water.
14. Install the radiator cap (Fig. 588).
1. Remove the Radiator. Refer to “Radiator Removal”
on page 5-42.
2. Unplug the cooling fan connector from the harness
connector (Fig. 589).
Fig 588 PICT-3771a
Fig 589 PICT-3754
3. Lift the cooling fan and shroud assembly out of the
bottom radiator plate (Fig. 590).
15. Check the antifreeze overfl ow bottle and make sure
it is up to indicator line.
Note: Cooling system capacity:
87 oz. (2.6 liters) Z593 and Z580
148 oz. (4.4 liters) Z595
16. Connect the negative battery cable. Start the unit
up and operate for about 5 minutes. Observe all the
cooling hoses for any leaks.
17. Turn the machine off.
18. Check the coolant level in the overfl ow bottle and
add as necessary.
Fig 590 PICT-3755
Cooling Fan Replacement