Service Manual

7-2 Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
Electric PTO Clutch Removal
The electric PTO clutch removal and installation are
similar on both the air cooled engine models and the
liquid cooled model. The only difference is the clutch
guard removal. The gure below points to the bolts
that need to be removed in both units (Fig. 355). The
procedure shows an air-cooled unit.
Fig 355 DSC-3131
On the Kawasaki liquid cooled models, remove 6 bolts to
access the clutch (Fig. 356).
Fig 356 DSC-3794
Fig 358 DSC-3134
2. Remove the right and left top bolt and nut on the top
strap guards to remove the clutch guard from the
unit (Fig. 358).
Fig 357 DSC-3131
This procedure is on the Air Cooled Engine Models and
follows the same procedure for the Liquid Cooled Engine
Model.
1. Loosen and remove 2 bolts and nuts located on the
clutch guard (Fig. 357).
A
A
B
B
A. Top strap bolts B. Clutch guard bolts