Service Manual

5-35Z Master 500 Gas Series Service Manual

Fig 286 DSC-2839

11. Install the throttle cable to the engine linkage.

Make sure the throttle is all the way back to the idle

position. Tighten the throttle clamp (Fig. 286).

Fig 285 DSC-2838

9. Install the mower drive belt around the electric PTO

clutch; follow the procedures for Replacing the

Mower Belt page 7-24.

10. Install the choke cable to the engine linkage; make

sure the choke knob is pushed all the way in before

tightening down the clamp (Fig. 285). Tighten the

choke cable clamp.

ENGINE

Fig 288 DSC-2824

13. Install two bolts and nuts connecting the rear

radiator mount to the frame (Fig. 288).

Fig 287 DSC-2826

12. Install the rear support assembly to the frame (Fig.

287).