Service Manual
7-21Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
6. Using a seal driver, drive or press the seal on the
lower end of the spindle housing until the seal is
ush with the outer edge of the housing (Fig. 426).
Fig 426 DSC-2693
7. Turn the spindle assembly over and install the split
ring spacer (Fig. 427).
Fig 427 DSC-2699
Fig 429 DSC-2694
9. Pack the tapered bearing with #2 grease and install
the tapered bearing (Fig. 429).
Fig 428 DSC-2700
8. Install the inner spacer to the spindle assembly (Fig.
428).