Service Manual

CHASSIS
3-50 Z580/Z589 DFI Z Master Service Manual
3
9. Remove the outside nut from the bolt that secures
the motion control damper to the right hand motion
control assembly (Fig. 178).
Fig 178 PICT-3066a
11. Remove the bolt, washer and nut that secure the
right hand control rod assembly to the right hand
motion control assembly (Fig. 180).
Fig 180 PICT-3079a
10. Disconnect the harness from the neutral switch
located under the right side of the traction frame
assembly (Fig. 179).
Fig 179 PICT-3075a
8. Remove the 2 bolts and washers securing the right
lever to the control shaft arm. Remove the right lever
(Fig. 177).
Fig 177 PICT-3064a
Right Hand Motion Control Assembly
Removal