Service Manual

MOWER DECKS

7-72 Z580/Z589 DFI Z Master Service Manual

Cross Shaft Rebuild

33. Place the cross shaft in the press and press a new

bearing onto the shaft (Fig. 800).

Fig 800 IMG-8525a

34. Install the key into the shaft keyway (Fig. 801).

Fig 801 IMG-8519a

37. Press the bearing onto the shaft (Fig. 803).

Fig 803 IMG-8530a

35. Place the cross shaft in a press with the installed

bearing down.

36. Align the keyway in the pinion gear with the key

installed in the shaft. Press the pinion gear onto the

shaft (Fig. 802).

Fig 802 IMG-8529a